Robotic Arm Add-on Pack for Starter Robot Kit #298000
2 på lager
Button Head Socket Cap Screw is a new kind of Socket Cap Screw, it has smaller head that can solve most problem of interfere with other components.
Makeblock Robotic Arm Add-on Pack is a robot pack to expand upon your Makeblock Starter Robot Kit. It contains all the parts to build the robotic arm such as DC Motor-37, Robot Gripper, beams, timing pulleys and hardware.
The robotic arm tank is interesting, nimble, and strong enough. It can be controlled by a IR remote controller , you can use the IR Remote controller to turn the robot in all the directions and pick up a bottle of water in 200ml.
Now, use this pack to build your Robotic Arm Tank!
- Expand upon Makeblock Starter Robot Kit to build a Robotic Arm Tank or Robotic Arm Car.
- All parts of the robotic arm are included.
- Largest open size of robot gripper is 76mm
- Motor inside the gripper will stop when it fully open and fully closed
Robot GripperSize Charts(mm):
|1 x Beam 0824-64||1 x Timing Pulley 90T||2 x Nylon lock Nut 4mm|
|1 x Beam 0824-80||1 x Timing Belt 123T||4 x Countersunk Screw M3x8|
|3 x Beam 0824-96||3 x Linear Motion Shaft D4x88mm||12 x Headless Set Screw M3x5|
|3 x Beam 0808-168||8 x Shaft Collar 4mm||6 x Plastic Ring 4x7x2mm|
|3 x Plate 3×6||1 x Flange Bearing 4x8x3mm||1 x Me Dual DC Motor Driver|
|1 x DC Motor-37 Bracket B||16 x Socket Cap Screw M4x8||2 x 6P6C RJ25 cable-20cm|
|1 x DC Motor-37 12V/50RPM||14 x Socket Cap Screw M4x14||1 x HEX Screwdriver 2.5mm|
|1 x Strong Robot Gripper||6 x Socket Cap Screw M4x22||1 x HEX Allen Key 1.5mm|
|1 x Timing Pulley18T||8 x Nut M4|
If you have any questions about this product or you need technical support, please post it in our forum.