Music Robot Kit V2.0 (With Electronics) #290010

Music Robot Kit V2.0 (With Electronics) #290010

kr 2.495,00

2 på lager (kan bli restordre)

Varenummer: 290010 Kategori: Stikkord:



Music Robot Kit V2.0 (With Electronics) is the improvement version of Music Robot Kit V1.0 (With Electronics).

Improvements List:

Me BaseBoard instead of previous Meduino and Me BaseShield. Reduce Size and easier to users.

Simplify the mechanical structure, reduce some unnecessary components

Adding LED RGB strip to bring some shiny effects when playing the music

Adding two new control modeMe Ultrasonic modules allows users to play the music via detecting the position of gesturesa pre-programmed tune can be played


This kit can be used to build a Music Robot. It can play the Xylophone by an application via USB cable installed on computer. By this application you can use your keyboard of computer to play the Xylophone by the Number Key from 1 to 7 directly. And you can also type a music score in the application and then send it to the robot, the robot will play the music you have sent automatically.



  • Three different ways to play this Music Robot

         1.Control by the position of gestures(Using an ultrasonic modules detect the position)

         2.A pre-programmed tune can be played(or you programme to play)

         3.Control by PC Software

  • High quality stepper motor mates with high performance Me stepper motor dirver

  • Easy to drive and can play Xylophone very well

  • Strong aluminum extrusion parts, anodizing surface


Power Supply: 12V


Arduino Library

For more details about this product, please visit Makeblock wiki page. If you have any question about this product or you need technical support, please post it in Makeblock forum.

Part list:

 1 x Beam 0824-64  24 x Socket Cap Screw M4x8
 2 x Beam 0824-96  40 x Socket Cap Screw M4x14
 5 x Beam 0808-96  2 x Socket Cap Screw M4x22
 1 x Beam 0808-160  50 x Nut M4
 2 x Slider 496  8 x Countersunk Screw M3x8
 2 x Bracket 3×3  5 x Headless Set Screw M3x5
 1 x Plate 3×6  2 x Nylon Stud M4*30
 2 x Plate 7×9  4 x Plastic Rivet R4060
 1 x Belt Connector  8 x Plastic Rivet R4120
 1 x 42BYG Stepper Motor Bracket  4 x Plastic Ring 4x8x1mm
 1 x DC Frame Type Solenoid HCNE1-0530  2 x Plastic Ring 4x7x2mm
 1 x 42BYG Stepper Motor  4 x Nylon Cable Ties
 1 x Shaft Connector-4mm  1 x Xylophone
 2 x Timing Pulley 62T  1 x Coloured Ribborn
 4 x Timing Pulley Slice 90T  1 x Me-Baseboard
 1 x Open-end Timing Belt (2m)  1 x Me-Ultrasonic Sensor
 2 x Threaded Shaft 4x39mm  1 x Me Stepper motordriver
 2 x Shaft Collar 4mm  1 x LED RGB Strip-Addressable, Sealed(0.5M)
 6 x V-slot Bearing  1 x Micro Switch
 3 x Flange Bearing 4x8x3mm  1 x RJ11 Adapter
 1 x HEX Screwdriver 3mm  1 x Wall Adapter Power Supply – 12VDC
 1 x Cross Screwdriver 3mm  3 x 6P6C RJ11 cable-20cm
 2 x HEX Allen Key 1.5mm  1 x USB 2.0 A-Male to Micro B-Male Cable
 1 x Wrench 7mm


Vekt 2300 g